Sierra Wireless AirCard 753S, Руководство пользователя

Страница: 10 / 62

Sierra Wireless Mobile Hotspot User Guide
10 2400159
Power Button
Mute Switch
The mobile hotspot automatically beeps when the battery is low, when you
receive a message, etc. To turn these beeps off, move the mute switch so the red
rectangle is visible. On the homepage,
http://swi.hotspot , you can customize your
hotspot to beep when specific changes in status occur. For more information, see
Set Audio Alerts on page 27.
LCD
As well as providing setup information (SSID and Wi-Fi Passphrase) the mobile
hotspot LCD displays:
• Instructions during setup
• Status messages such as “Searching for network”, “Connected”, etc.
• Status icons (See Icons on the LCD Screen on page 11 for details.)
• Data Usage information
• Network name
• Error messages (See Alerts on page 49 for troubleshooting suggestions.)
• Wi-Fi Protected Setup (WPS) instructions — a fast, easy way to connect
WPS-enabled devices to your Wi-Fi network
To personalize the mobile hotspot and change the settings, go to the homepage
(
http://swi.hotspot ).
Dashboard mode
More detailed information and instructions are available in the LCD Dashboard
mode. To access the Dashboard, double-press the Power button. Double-press
the Power button again to cycle through the Dashboard pages.
The information and instructions available on the Dashboard varies depending on
your device and your service provider. Information available may include:
• Connect information (SSID and Wi-Fi Passphrase) and homepage URL
Desired result Action
Turn mobile hotspot on Press and hold the power button for a few seconds.
Turn mobile hotspot off Press and hold the power button for a few seconds.
Wake up LCD screen Press and quickly release the power button.
View WPS instructions Double-press the power button to access the Dashboard. If
necessary, double-press the power button again to cycle
through the Dashboard pages until the WPS instructions
appear.
Respond to prompts on
the LCD screen Press and quickly release the power button when prompted
to do so by the LCD screen. (This is used to confirm an
action.)