Page 23
•
Close the door of the appliance and move the air control to the cold-start position; see the
following figure.
•
When the fire is burning well move the control arm to the desired position for heat output.
•
Let this fire develop into a good blaze until there is glowing bed of charcoal. You can then add
fuel and adjust the appliance, see the following section “Burning Wood”.
Refueling the Stove
After you have followed the instructions for lighting:
• Slowly open the door of the appliance.
• Move the control arm to the “MAX” position
•
Spread out the charcoal bed evenly across the bottom of the fire compartment.
• Stack a few logs on the charcoal bed.
• Close the door of the appliance.
•
When the fire is burning well move the control arm to the desired position for heat output.
Open stacking
If the logs are stacked openly, the wood will burn quickly
as the oxygen can reach each log easily. If you want to
use the stove for a short while, make an open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn more
slowly as the oxygen can only reach some logs easily.
If you want to burn wood for a longer period, make a
compact stack.
Cold
Start Max
Min
Содержание Lynwood W76
Страница 19: ...Page 19 2 3 1 4 6 8 9 12 11 10 7 5...
Страница 31: ...Page 31 Spare Parts...
