en
Troubleshooting
58
Errors
Cause
Troubleshooting
The door cannot be opened.
Rinse Hold
is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing
inicio /
pausa + carga
.
the programme status is Rinse Hold",
Page 44
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Drain
programme.
Programme with active oxy-
gen has been stopped; the
active oxygen is removed.
▶
Wait until there is no active oxygen in
the drum.
Power failure.
▶
Open the door using the emergency
release.
The water is not draining.
Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain hose
is caught or jammed.
▶
Ensure that the drain pipe and water
drain hose are not kinked or trapped.
Drain pump is blocked.
▶
Rinse Hold
is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing
inicio /
pausa + carga
.
the programme status is Rinse Hold",
Page 44
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a max-
imum height of 1 metre.
Water is not flowing in. Deter-
gent is not being dispensed.
You have not pressed
inicio /
pausa + carga
.
▶
Press
inicio / pausa + carga
.
The filter in the water inflow is
blocked.
▶
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is kinked
or jammed.
▶
Ensure that the water inlet hose is not
kinked or jammed.
Содержание WM16XFH0ES
Страница 18: ...en Installation and connection 18 In doing so hold the foot tight and do not adjust its height ...
Страница 69: ......
Страница 70: ......
Страница 71: ......