Home Connect
en
45
Deactivating the childproof
lock
Requirement:
To deactivate the child-
proof lock, the appliance must be
switched on.
▶
Press and hold the two
3 sec.
buttons for approx. 3 seconds.
So that the programme currently run-
ning is not cancelled, the pro-
gramme selector must be set to the
initial programme.
a
goes out in the display.
Home Connect
This appliance is network-capable.
Connecting your appliance to a mobile
device lets you control its functions via
the Home Connect app, adjust its basic
settings and monitor its operating
status.
Home Connect services are not avail-
able in every country. The availability of
the Home Connect function depends
on the availability of Home Connect
services in your country. You can find
information about this at: www.home-
connect.com.
To use Home Connect, first set up a
connection to the WLAN home network
(Wi-Fi
1
) or LAN home network and the
Home Connect app.
There are various ways to connect to
your home network, depending on the
features of your appliance:
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 45
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) without
WPS function", Page 46
The Home Connect app will guide you
through the entire login process. Follow
the instructions in the Home Connect
app to configure the settings.
Tips
¡
Please consult the Home Connect
documents supplied.
¡
Please also follow the instructions in
the Home Connect app.
Notes
¡
Please note the safety precautions in
this instruction manual and make
sure that they are also observed
when operating the appliance via the
Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible to
operate the appliance using the
Home Connect app.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is the
simplest way to connect the appliance
to your home network.
Requirement:
If your router has a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) automatically.
1.
Press and hold for approx. 3
seconds.
a
You are now in the Home Connect
menu.
2.
Select
Connect
.
3.
Confirm the message in the display.
4.
Press the WPS button on the router
within the next 2 minutes.
Take note of the information in the
documents for your router.
a
flashes in the display.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Содержание WM16XFH0ES
Страница 18: ...en Installation and connection 18 In doing so hold the foot tight and do not adjust its height ...
Страница 69: ......
Страница 70: ......
Страница 71: ......