Siemens WM16XFH0ES, Руководство пользователя и инструкции по установке

Страница: 33 / 72

Familiarising yourself with your appliance
en
33
Button Selection Description
(Remote Start) ¡
Activate
¡ Deactivate
¡ Open the Home Con-
nect menu
If you briefly press the button, the appliance will be
enabled for remote start via the Home Connect app
If you press the button for approx. 3 seconds, the
Home Connect menu opens.
Notes
¡ For safety reasons, remote start cannot be activ-
ated if the door is open.
¡ Remote start is deactivated for safety reasons in
the following circumstances:
–
Open the door.
–
Press inicio / pausa + carga .
–
Press .
–
Switch off the appliance.
–
Following a power cut.
3 sec. (Child Lock 3
sec.)
¡
Activate
¡ Deactivate
Activate or deactivate the childproof lock.
Disable the control panel to prevent unwanted or
accidental operation.
If the childproof lock is activated and the appliance
has been switched off, the childproof lock remains
activated.
→
"Childproof lock", Page 44
ajuste base 3 sec. (Ba-
sic Settings 3 sec.) Basic settings
→
Page 49
Change the basic settings for the appliance.
→
"Changing the basic settings", Page 50
opciones / opções (Op-
tions) Multiple selection Activate additional programme settings.
→
"Adjusting additional programme settings",
Page 41
The additional programme settings can be found in
this overview.
prelav. (Prewash) ¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g. for washing
heavily soiled laundry.
Extra rinse ¡ Activate
¡ Deactivate
Activate or deactivate up to three additional rinse
cycles.
Recommended for particularly sensitive skin or in
regions with very soft water.
Rinse Hold
¡
Activate
¡ Deactivate
Activate or deactivate spinning and draining at the
end of the washing cycle.
The laundry remains in the water after the last rinse
cycle.
→ "Resuming the programme when the pro-
gramme status is Rinse Hold", Page 44
Silent Wash
¡
Activate
¡ Deactivate
Activate or deactivate Silent Wash, e.g. for washing
during the night.
The audible signal at the end of programme is deac-
tivated and the final spin speed is reduced.