37
3.
Take the drainage hose out of the holder.
4.
Remove sealing cap, allow detergent solution to flow out.
Have a suitable container ready.
Push up the closing cap and place the drain hose back in its
holder.
Note:
Residual water may run out.
5.
Carefully unscrew the pump cover. Clean the interior, pump
cover thread and pump housing (fan impeller in the
detergent-solution pump must rotate).
6.
Reinsert and screw on pump cover. Handle should be
vertical.
7.
Close the service flap. If required, lock disengaged service
flap beforehand.
²
To prevent unused detergent from flowing into the outlet during
the next wash: Pour 1 litre of water into dispenser
II
and start the
Drain
programme.
Drainage hose on the siphon blocked
1.
Switch off the appliance. Pull out the mains plug!
Note:
Residual water may run out!
2.
Loosen hose clip, carefully remove drainage hose.
3.
Clean drainage hose and siphon spigot.
4.
Re-attach drainage hose and secure connection point with
hose clip.
www.devicemanuals.eu
cover thread and pump housing (fan impeller in the
cover thread and pump housing (fan impeller in the
Reinsert and screw on pump cover. Handle should be
Reinsert and screw on pump cover. Handle should be
Close the service flap. If required, lock disengaged service
Close the service flap. If required, lock disengaged service
To prevent unused detergent from flowing into the outlet during
To prevent unused detergent from flowing into the outlet during
the next wash: Pour 1 litre of water into dispenser
the next wash: Pour 1 litre of water into dispenser
programme.
programme.
Drainage hose on the siphon blocked
Drainage hose on the siphon blocked
Switch off the appliance. Pull out the mains plug!
Switch off the appliance. Pull out the mains plug!
