40
Information on the display panel
Display
Cause/Remedy
The door cannot be
locked, please open
the door again, then
close it and select
"start/pause".
– Washing may be caught. Please open and close washing
machine door again and select
Start
/Reload
Ü
.
– If required, shut washing machine door or remove washing and
shut again.
– If required, switch appliance off and on again; set programme
and make individual settings; start programme.
Please open tap
– Turn on tap fully.
– Supply hose kinked/jammed.
– Water pressure too low. Clean the filter.
~
Page 38
Please clean pump
– Drain pump blocked. Clean the drain pump.
~
Page 36
– The water drainage pipe/drain hose is blocked. Clean the
drainage hose on the siphon.
~
Page 37
Pause: Reload is not
possible
Water level or temperature is too high.
Select
Start
/Reload
Ü
to continue the programme.
Door cannot be
unlocked: Water
level or temperature
is too high
Water level or temperature is too high.
Select
Start
/Reload
Ü
to continue the programme.
aquaStop has been
activated!
Please call customer
service
not applicable without Aqua-Stop
Water in the base pan, appliance leaking.
Call customer service!
~
Page 43
Auto power-off in ...
seconds,
Appliance automatically switches off after ... seconds if it is not
operated for a prolonged period. In order to cancel the programme,
press any button.
~
Page 33
Cooling down the
detergent solution
To protect the wastewater pipes, the hot detergent solution is
cooled before being drained.
Other displays
Error E: XXX
Switch off appliance, wait 5 seconds and switch on again. If the
display is indicated again, call customer service.
~
Page 43
www.devicemanuals.eu
– Water pressure too low. Clean the filter.
– Water pressure too low. Clean the filter.
Please clean pump
– Drain pump blocked. Clean the drain pump.
Please clean pump
– Drain pump blocked. Clean the drain pump.
– The water drainage pipe/drain hose is blocked. Clean the
– The water drainage pipe/drain hose is blocked. Clean the
drainage hose on the siphon.
drainage hose on the siphon.
~
~
Page 37
Page 37
Water level or temperature is too high.
Water level or temperature is too high.
to continue the programme.
to continue the programme.
Water level or temperature is too high.
Water level or temperature is too high.
Ü
Ü
to continue the programme.
to continue the programme.
not applicable without Aqua-Stop
not applicable without Aqua-Stop
Water in the base pan, appliance leaking.
Water in the base pan, appliance leaking.
Call customer service!
Call customer service!
Appliance automatically switches off after ... seconds if it is not
Appliance automatically switches off after ... seconds if it is not
operated for a prolonged period. In order to cancel the programme,
operated for a prolonged period. In order to cancel the programme,
press any button.
press any button.
To protect the wastewater pipes, the hot detergent solution is
To protect the wastewater pipes, the hot detergent solution is
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
