38
Filter blocked in water inlet hose
First, release water pressure in the supply hose:
1.
Turn off the tap!
2.
Select any programme (except Spin/Drain).
3.
Select
Start
/Reload
Ü
. Leave programme for approx. 40
seconds.
4.
Press the
#
button. Appliance is switched off. Pull out the
mains plug!
5.
Clean the filter:
Disconnect the hose from the water tap.
Clean filter with small brush.
and/or for standard and Aqua-Secure models:
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6.
Connect the hose and check for leaks.
www.devicemanuals.eu
and/or for standard and Aqua-Secure models:
and/or for standard and Aqua-Secure models:
Remove hose from the rear of the appliance.
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
Take out filter with pliers and clean.
Connect the hose and check for leaks.
Connect the hose and check for leaks.
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
