Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Rails
42
p
Rails
Rails
Detaching the shelf supports
The shelf supports are each fixed to the side panels of
the cooking compartment at three points.
1.
Grip the front of the shelf support and pull it round to
the middle of the cooking compartment.
The front hook of the shelf support will come out of
the hole.
2.
Swing the shelf support round further and pull it out
of the rear holes in the side panel.
3.
Remove the shelf supports from the cooking
compartment.
Refitting the shelf supports
1.
Insert the hooks of the shelf support into the rear
holes in the side panel.
2.
Push the front hook of the shelf support into the
hole.
q
Appliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the oven door.
Removing the door panels
1.
Open the oven door fully.
2.
Lock the two hinges on the left and right using the
locking pin.
Note:
The locking pins must be fully inserted into the
holes in the hinges.
3.
Use both hands to lift the bottom of the inner panel
until the fastening pins come out of the holder.
4.
Carefully pull the top of the inner panel out of the
retaining strip and lift it to completely free the panel
from the door.
D
E
