Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Trouble shooting
20
3
Trouble shooting
Trouble shooting
--------
Fault messages
If a fault message beginning with
“§§
appears on the
display, set the function selector to "Off". If the fault
message does not disappear, please contact our after-
sales service.
--------
Fault
Possible cause
Notes/remedy
The appliance does not work
The plug is not plugged into the mains
Connect the appliance to the power supply
Power cut
Check whether other kitchen appliances are working
The circuit breaker is faulty
Check in the fuse box to make sure that the fuse for
the appliance is OK
The appliance cannot be started
The appliance door is not fully closed
Close the appliance door
The appliance is not switched off
Switch the appliance off and back on again
‚ƒ
:
‹‹
is flashing on the display
Power failure
Reset the clock.
The interior lighting is not working
Top/bottom heating gentle mode is active
In top/bottom heating gentle mode, the interior light-
ing is not switched on.
The bulb is faulty
Replace the bulb.
All food that is cooked in the oven
burns within an extremely short
period of time.
Thermostat faulty.
Call the after-sales service.
Door panels are steamed up.
This is normal and results from differences in temper-
ature.
Heat the appliance up to 100 °C and then switch it
back off after 5 minutes.
Although the appliance is switched
on, it cannot be operated; the
'
symbol is shown on the display
The childproof lock is activated.
Press and hold the
c
1
touch button until the
'
symbol goes out.
Fault message
Possible cause
Information/remedy
“§§‚
Temperature sensor failed.
Call the after-sales service.
“§§ƒ
The temperature in the cooking compartment is too
high.
Call the after-sales service.
“§§…
Door locking mechanism incorrectly activated.
Call the after-sales service.
“§§†
Fan heating element faulty or not connected.
Call the after-sales service.
“§§‡
Motor faulty or not connected.
Call the after-sales service.
“§§‰
Cooling fan faulty or not connected.
Call the after-sales service.