Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Appliance door
18
q
Appliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the oven door.
Removing the door panels
1.
Open the oven door fully.
2.
Lock both hinges on the left and right using the
locking pin.
Note:
The locking pins must be fully inserted into the
holes in the hinges.
3.
Lift the bottom of the inner panel slightly until the
fastening pins come out of the holder (
1
).
4.
Carefully lift the top of the inner panel until the
fastening pins come out of the holder (
2
).
Caution!
When lifting the inner panel, the middle panel may
stick to the inner panel. Make sure that the middle
panel does not fall.
5.
Remove the inner panel.
6.
Remove the middle panel.
Note:
The middle panel is kept in place with rubber
bushings rather than retaining pins.
Clean the panels with glass cleaner and a soft cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Fitting the door panels
1.
Reinsert the middle panel.
Notes
– If the Low-E symbol can be read, the middle
panel is inserted correctly.
– Make sure that the panel is seated correctly. All
rubber mounts must lay flat against the outer
panel.
2.
Reinsert the inner panel.
Note:
All four fastening pins must engage in the
holders provided for them.
3.
Remove the locking pins and close the oven door.