Building Technologies
- 7 -
TEL50.GSM
3.
General information
The TEL50.GSM phone remote control has been designed for remote operation of electrical or electro-hydraulic equipment
such as room thermostats, boilers, burners, heaters, zone valves, circulation pumps, irrigation systems, etc. It is particularly
suitable for holiday home installations where there is no fixed telephone network.
The remote control can only be used through the GSM mobile network. Commands can be sent via the fixed telephone network
(DTMF tones) or GSM mobile network (DTMF tones and SMS messages with preset syntax). The TEL50.GSM also allows
connection of an LG-Ni1000 temperature sensor (optional) and forwarding via SMS, subject to special querying, of the
temperature value measured at that time.
The device can handle both a temperature threshold exceeded alarm (adjustable) and a general alarm to be connected to the
respective input on the terminal box. In both cases, activation of the alarm generates a specific SMS that is sent to a predefined
user list.
The 2 control outputs can be enabled completely
separately. You can enable and/or disable the outputs
locally using the button on the device according to the
following binary sequence.
Cycle OUT1 OUT2
1 OFF
OFF
2 ON
OFF
3 OFF ON
4 ON ON
The device is suitable for use with the Chronogyr room
temperature controllers REV16 – REV23 – REV33 –
REV100 – REV200 and new REV13.. - REV17.. -
REV24.. - REV34..
SMS
DTMF
DTMF
