Siemens Synco-Gamma страница 21 Скачать руководство пользователя

Страница: 21 / 63

Application Manual

Nr. 03

Hotel rooms – room automation

Synco™

& Gamma

Fan coil unit with radiator in the bathroom, sun protection, presence-
dependent switching off of lighting and power supply

Features

Individual room temperature control, heating and cooling

Two control loops for the room and the bathroom

Automatic or manual fan control, 1- or 3-speed

Automatic or manual changeover of heating/cooling mode

Window contact – central detection of open windows

Detection of presence via presence detector and door contact

Presence- and time-dependent control of HVAC, lighting, sun protection, and power
supply to the room

Dimming and switching of lighting

Central operation and display of HVAC, lighting, and sun protection

Pushbuttons for "SOS", "Make up room", and "Do not disturb"

Demand-compensated production of heat and cooling energy thanks to automatic data
exchange with primary plant

Room setup

UP 204 Contouch room controller:

The UP 204 acquires the room temperature and sends

temperature, setpoint shift, operating mode and fan speed commands to the RXB room controller via
the KNX bus. The Contouch room controller can also be used to control the lighting and the blinds.

2. RXB21.1 room controller:

The RXB21.1 controls the room temperature via the fan coil unit. If

required, the room thermostat sends a heat/cooling energy request to the primary controller.

AQR2532 room sensor with AQR2570 basic module:

Der AQR acquires and controls the room

temperature in the bathroom via the radiator.

AP 562/02 valve actuator:

The AP 562/02 drives the radiator valve in the bathroom. It receives the

positioning signal from the AQR controller.

S 290 door/window contact:

The window contact causes the room operating mode to change to

Protection when the window is open.

N 528/31 universal dimmer, main module:

The N528/31 features a channel to control a lighting

group up to 300 VA.

Содержание Synco-Gamma
































































Результаты поиска

Содержание Synco-Gamma

Отзывы:

Похожие инструкции для Synco-Gamma

Бренды по названию

Популярные бренды

Siemens Synco-Gamma, Инструкция по применению

Результаты поиска

Содержание Synco-Gamma

Отзывы:

Похожие инструкции для Synco-Gamma

Бренды по названию

Популярные бренды