Siemens SITRANS RD300 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 110

Siemens SITRANS RD300 Скачать руководство пользователя страница 21

SITRANS RD300

A5E31917845

SITRANS RD300 – OPERATING INSTRUCTIONS

Page 15

MeterView Pro Software

The meter can also be programmed using the PC-based MeterView Pro
software included with the meter. This software can be installed on any
Microsoft® Windows® (2000/XP/Vista/7/8/10) computer by connecting
the meter’s onboard USB. The meter is powered by the USB
connection, so there is no need to wire anything prior to programming
the meter, though USB is intended only for meter configuration.

MeterView Pro Installation

1. Connect one end of the provided USB cable to the meter and the

other end to the computer. The computer will automatically install
the driver software it needs to talk to the meter.

Only one meter may be connected at a time. Attaching multiple
meters will cause a conflict with the meter software.
Disconnect other meters before performing these steps.

2.

Once the driver is installed, an AutoPlay dialog should appear for
the drive “MAINSTAL.” Click “Open folder to view files.”

If the computer does not display an AutoPlay dialog for the drive
“MAINSTAL,” you should open

My Computer

and double-click on

the drive labeled “MAINSTAL.”

«
...
19
20
21
22
23
...
»

Содержание SITRANS RD300















































































































Отзывы:

Нет отзывов