manualshive.com logo in svg

Siemens SITRANS F MAG 6000 I, Руководство по эксплуатации, Страница: 7 / 104

Поделиться
Скачать
Siemens SITRANS F MAG 6000 I Скачать руководство пользователя страница 7

Introduction

1

1.1

Preface

These instructions contain all the information you need for using the device.   
The instructions are aimed at persons mechanically installing the device, connecting it 

electrically, configuring the parameters and commissioning it, as well as service and 

maintenance engineers.

Note
It is the responsibility of the customer that the instructions and directions provided in the 

operating instructions are read, understood, and followed by the relevant personnel before 

installing the device.

1.2

Items supplied

● SITRANS F M MAG 6000 I or MAG 6000 I

Ex de transmitter

● Wall mounting bracket (remote version)
● SITRANS F M literature CD containing

software, certificates and device manuals

● Quick start guide

1.3

Revision history

The contents of these instructions are reviewed regularly and any corrections included in 

subsequent editions. We welcome all suggestions for improvement. 
The following table lists the most important changes made to the documentation in the current 

and previous editions.

Edition

Remarks

HW version

SW version

08/2018

● Updated Safety Notes

08

4.08 X06

04/2016

● Various technical specifications updated
● Control drawing updated

08

4.08 X06

SITRANS MAG 6000 I/6000 I Ex de

Operating Instructions, 08/2018, 

A5E02083319-AH

7

Содержание SITRANS F MAG 6000 I









































































































Отзывы:

Нет отзывов