Siemens SITRANS F MAG 6000 I, Руководство по эксплуатации, Страница: 43 / 104

BACKWARD KEY This key is used to step backwards through the menus.
CHANGE KEY With this key settings or numerical values are changed.
SELECT KEY With this key figures to be changed are selected.
LOCK/UNLOCK
KEY
This key enables the operator to change settings and it gives
access to submenus.
6.2 Menu structure
The menu is built up of two parts. An operator menu and a setup menu, see also Menu
diagrams (Page 75).
Operator menu
The operator menu is for daily operation. It can be customized in the operator menu setup in
which the menus that are to be available to the operator are selected. The transmitter always
starts up in operator menu No. 1. The forward and the backward keys are used to step
through the operator menus.
Setup menu
The setup menu is for commissioning and service only. Access to the setup menu is gained
by pressing the top up key for 2 seconds. The setup menu operates in two modes:
● View mode
● Setup mode
View mode is a read-only mode. The pre-selected settings can only be scanned.
Setup mode is a read and write mode. The pre-selected settings can be scanned and changed.
Access to the setup mode is password-protected. The factory set password is 1000.
Access to a submenu in the setup menu is gained by pressing the lock key . Press the top
up key briefly to return to the previous menu. Press longer (2 sec.) to exit the setup menu
and return to operator menu no. 1.
6.3 Changing password
The setup menu is password-protected in order to ensure that only authorized personnel can
make any changes in transmitter settings.
Change password as follows:
1. Press top up key for 2 sec.
2. Enter password.
3. Use forward key or backward key to reach password menu.
4. Press lock/unlock key to unlock password.
Commissioning
6.3 Changing password
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
43