manualshive.com logo in svg

Siemens SITRANS F MAG 6000 I, Руководство по эксплуатации, Страница: 57 / 104

Поделиться
Скачать
Siemens SITRANS F MAG 6000 I Скачать руководство пользователя страница 57

Service and maintenance

9

Under ideal conditions the flowmeter will operate continuously with no manual adjustment or 

intervention required.

9.1

Maintenance

The device is maintenance-free. However, a periodic inspection according to pertinent 

directives and regulations must be carried out.   
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds

NOTICE
Repair and service must be carried out by Siemens authorized personnel only.

Note
Siemens defines flow sensors as non-repairable products.   

9.2

Certificates

You can find certificates on the Internet at Certificates (

https://www.siemens.com/

processinstrumentation/certificates

) or on an included DVD.

9.3

Technical support

If you have any technical questions about the device described in these Operating Instructions 

and do not find the right answers, you can contact Customer Support:     
● Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

)

● Via Phone:

– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575

Further information about our technical support is available on the Internet at 

 Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

) 

SITRANS MAG 6000 I/6000 I Ex de

Operating Instructions, 08/2018, 

A5E02083319-AH

57

Содержание SITRANS F MAG 6000 I









































































































Отзывы:

Нет отзывов