Siemens SITRANS F M MAG 5000 Скачать руководство пользователя страница 44

Страница: 44 / 107

Commissioning

6.3 Menu structure

Lock field symbols

Ready for change

Access to submenu

Value locked

RESET MODE: Zero setting of totalizers and

initialization of setting

Keypad

The keypad is used to set the flowmeter. The keys function as follows:

TOP UP KEY

This key (when held for 2 sec.) is used to switch between

operator menu and setup menu. In transmitter setup menu, a

short press will cause a return to previous level.

FORWARD KEY

This key is used to step forward through the menus. It is the

only key normally used by the operator.

BACKWARD KEY

This key is used to step backwards through the menus.

CHANGE KEY

With this key settings or numerical values are changed.

SELECT KEY

With this key figures to be changed are selected.

LOCK/UNLOCK

KEY

This key enables the operator to change settings and it gives

access to submenus.

6.3

Menu structure

The menu is built up of two parts. An operator menu and a setup menu, see also overview

diagrams MAG 5000/6000 and MAG 5000/6000 CT.

Operator menu

The operator menu is for daily operation. It is customized in the operator menu setup. The
transmitter always starts up in operator menu No. 1. The forward and the backward keys

are used to step through the operator menus.

Setup menu
The setup menu is for commissioning and service only. Access to the setup menu is gained

by pressing the top up key for 2 seconds. The setup menu operates in two modes:
●

View mode

●

Setup mode

View mode is a read-only mode. The pre-selected settings can only be scanned.

www.eltra-trade.com [email protected]

+421 552 601 099

Содержание SITRANS F M MAG 5000












































































































Результаты поиска

Содержание SITRANS F M MAG 5000

Отзывы:

Siemens SITRANS F M MAG 5000, Руководство пользователя, Страница: 44 / 107

Результаты поиска

Содержание SITRANS F M MAG 5000

Отзывы: