Siemens SITRANS F M MAG 5000 Скачать руководство пользователя страница 31

Страница: 31 / 107

Installing/Mounting

4.5 MAG 5000/6000 CT

Tighten cable glands to obtain optimum sealing.

CAUTION

When remote mounted, power supply PE wire must be connected to PE terminal (

Coil cable shield must be connected to SHIELD terminal.

Mount transmitter on terminal box.

10.

Transmitter is ready to be powered up.

NOTICE

Exposing the transmitter to direct sunlight may increase the operating temperature

above its specified limit, and decrease display visibility.
A sun shield is available as accessory.

4.5

MAG 5000/6000 CT

To ensure that the settings of this custody transfer-approved MAG 5000/6000 CT transmitter

are not changed, it is necessary to install a hardware key to lock the software functions and

to seal the device.
MAG 6000 CT is installed like a Standard MAG 6000 except for the final sealing.
Calibration sealing has been carried out at calibration.

www.eltra-trade.com [email protected]

+421 552 601 099

Содержание SITRANS F M MAG 5000












































































































Результаты поиска

Содержание SITRANS F M MAG 5000

Отзывы:

Siemens SITRANS F M MAG 5000, Руководство пользователя, Страница: 31 / 107

Результаты поиска

Содержание SITRANS F M MAG 5000

Отзывы: