Siemens SITRANS F M MAG 5000 Скачать руководство пользователя страница 14

Страница: 14 / 107

Safety notes

CAUTION

Correct, reliable operation of the product requires proper transport, storage, positioning and

assembly as well as careful operation and maintenance. Only qualified personnel should

install or operate this instrument.

Note
Alterations to the product, including opening or improper repairs of the product, are not

permitted.
If this requirement is not observed, the CE mark and the manufacturer's warranty will expire.

2.1

Laws and directives

General requirements

Installation of the equipment must comply with national regulations. For example EN 60079-

14 for the European Community.

Instrument safety standards

The device has been tested at the factory, based on the safety requirements. In order to

maintain this condition over the expected life of the device the requirements described in

these Operating Instructions must be observed.

Environmental conditions according to IEC 61010-1 (2001)

●

Indoor use

●

Altitude up to 2000m

●

Maximum relative humidity 80% for temperatures up to 31°C (88°F) decreasing linearly

up to 50% relative humidity from 40°C (104°F)

●

Main supply voltage fluctuations up to ±10% of the nominal voltage (see technical

specifications)

●

Overvoltage category II

●

Pollution degree 2

www.eltra-trade.com [email protected]

+421 552 601 099

Содержание SITRANS F M MAG 5000












































































































Результаты поиска

Содержание SITRANS F M MAG 5000

Отзывы:

Siemens SITRANS F M MAG 5000, Руководство пользователя, Страница: 14 / 107

Результаты поиска

Содержание SITRANS F M MAG 5000

Отзывы: