manualshive.com logo in svg

Siemens SITRANS F FST030, Руководство по эксплуатации, Страница: 128 / 142

Поделиться
Скачать
Siemens SITRANS F FST030 Скачать руководство пользователя страница 128

SIMATIC PDM 

 

B.1 Commissioning with SIMATIC PDM 

 

SITRANS F Ultrasonic flowmeters FST030 (HART) 

126

 

Operating Instructions, 08/2017, A5E35971532-AC 

B.1.4

 

Initial setup 

To ensure that SIMATIC PDM connects properly, please complete the process outlined 

below: 

B.1.5

 

Integrating the EDD 

Integrating the Electronic Device Description (EDD) 

The Device Integration Manager is the SIMATIC PDM function for integrating device 

descriptions. 

Device descriptions of the Device Library DVD 
Make sure the device descriptions are always integrated in SIMATIC PDM from the Device 

Library DVD provided with your version of SIMATIC PDM. Changes in the device 

descriptions and the catalog structure may exist between the different versions. 

Upgrading SIMATIC PDM 
1.

 

Close all SIMATIC programs that are open on the PDM PC. 

2.

 

Go to the Windows Start menu and select the menu command SIMATIC PDM 

→

 Device 

Integration Manager under the Siemens SIMATIC programs. You must accept the license 

agreement to be able to use the Device Integration Manager. 

3.

 

Select File 

→

 Read device descriptions from source directory... or File 

→

 Read device 

descriptions from compressed source. 

4.

 

Navigate to the folder with the device descriptions in the tree structure. 

 

 

 

Note 
Device Library DVD 
The Device Library DVD is supplied with SIMATIC PDM. Select the drive containing the 

DVD. 

 

5.

 

Click OK. 

The device descriptions found are displayed in the Devices list. 

6.

 

Select the check boxes for the devices whose device descriptions are to be integrated. 

The check box is automatically selected for devices that have not been integrated or have 

been integrated with an older version. You can work with a split device list window. 

7.

 

Select Catalog 

→

 Integration. 

The device descriptions are transferred to the PC. 

 

 

Note 
During the device description integration 
Do not open any SIMATIC programs until the device description integration has completed. 

 

Содержание SITRANS F FST030















































































































































Отзывы:

Нет отзывов