Siemens SITRANS CC220 Скачать руководство пользователя страница 7

Страница: 7 / 80

Getting started

Before commissioning the devices

Observe the following safety instructions:

• General safety notes (Page 13)

• Basic safety notes: Installing/mounting (Page 28)

• Basic safety notes: Connecting (Page 33)

Read the entire operating instructions in order to achieve the optimum performance of the
system.

Procedure

1. Start SITRANS SCM IQ in MindSphere as an admin the very first time after provisioning.

Starting SITRANS SCM IQ in MindSphere (Page 37)
You need to perform this task only the very first time after launching SITRANS SCM IQ to
MindSphere. You do not need to repeat this task at a later stage.

2. Mount SITRANS CC220.

Mounting SITRANS CC220 (Page 23)

3. Connect SITRANS CC220.

Connecting SITRANS CC220 (Page 34)

4. Power up SITRANS MS200.

Powering up SITRANS MS200 (Page 38)

5. Mount SITRANS MS200.

Installation instructions SITRANS MS200 (Page 28)

6. Integrate SITRANS MS200 to MindSphere Asset Manager.

Integrating SITRANS MS200 to MindSphere Asset Manager (Page 40)

7. Commission SITRANS CC220 with SITRANS SCM IQ.

Commissioning SITRANS CC220 with SITRANS SCM IQ (Page 41)

8. Commission SITRANS MS200 with SITRANS SCM IQ.

Commissioning SITRANS MS200 with SITRANS SCM IQ (Page 43)

9. Configure the user notifications in SITRANS SCM IQ.

Configuring notifications (Page 44)

10.As soon as SITRANS MS200 has collected measurement data, train machine learning models

and manage detected anomalies.
Training anomaly detection models (Page 47)
Managing anomalies in SITRANS Anomaly IQ (Page 49)

Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA

Содержание SITRANS CC220

















































































Результаты поиска

Содержание SITRANS CC220

Отзывы:

Siemens SITRANS CC220, Руководство по эксплуатации, Страница: 7 / 80

Результаты поиска

Содержание SITRANS CC220

Отзывы: