Siemens SITRANS CC220 Скачать руководство пользователя страница 67

Страница: 67 / 80

Diagnostics and troubleshooting

10.1

Meaning of the LED states on SITRANS CC220

Description / in‐
scription

Status

Meaning, comment

PWR

Green

Power on

Green

Micro SD card active

USB

Green

USB power (5V) is available

Red

Overcurrent

USER
(green/red/orange)

Flashes red

User never attempted to copy the public key for establishing
a connection to SITRANS SCM IQ. (Onboarding)

Flashes orange

Waiting for credentials for completing the process of estab‐
lishing a connection to SITRANS SCM IQ. (Onboarding)

Flashes green

Successfully established a connection and ready for com‐
munication with SITRANS SCM IQ. ("onboarded")

Lights up red

Resetting or disconnecting SITRANS CC220 from SITRANS
SCM IQ (Offboarding) (Page 51).

Flashes slowly
orange

The log files (Page 54) are being copied to the USB stick via
the USB command.

10.2

Troubleshooting

Symptom

Cause of error

Remedy

You can not establish a connection be‐
tween SITRANS CC220 and SITRANS SCM
IQ (Onboarding)

SITRANS CC220 might still be in a con‐
nection process to another system.

Cancel the connection of SI‐
TRANS CC220 to the other system (Off‐
boaring) (Page 51)

The "ConBox_Commands.json
(Page 54)" might still be stored on the
USB stick.

Remove the "ConBox_Commands.json"
file from the USB stick.

You did not reveice data from SITRANS
MS200 within 15 minutes after onboard‐
ing.

PIN was changed before onboarding.

Perform factory reset on SITRANS
MS200.

Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA

Содержание SITRANS CC220

















































































Результаты поиска

Содержание SITRANS CC220

Отзывы:

Siemens SITRANS CC220, Руководство по эксплуатации, Страница: 67 / 80

Результаты поиска

Содержание SITRANS CC220

Отзывы: