9.1.1.1
Repair information
Carrying out repairs
Only qualified personnel are permitted to repair the device. Contact your local representative.
See section "Technical support (Page 76)".
WARNING
Unauthorized opening and improper repairs on the device may result in substantial
damage to equipment or endanger the user.
• Always disconnect the power plug before you open the device.
• Only install system expansion devices designed for this device. If you install other expansion
devices, you may damage the device or violate the safety requirements and regulations on
RF suppression. Contact your technical support team or where you purchased your PC to
find out which system expansion devices may safely be installed.
If you install or exchange system expansions and damage your device, the warranty
becomes void.
CAUTION
Electrostatic sensitive devices (ESD)
The device contains electronic components which are destroyed by electrostatic charges. This
can result in malfunctions and damage to the machine or plant.
Make sure you take precautionary measures even when you open the device, for example,
when opening device doors, device covers or the housing cover. For more information, refer to
the ESD Guideline.
Limitation of liability
All technical specifications and approvals of the device only apply if you use expansion
components that have a valid CE approval (CE mark). The installation instructions for expansion
components in the associated documentation must be observed.
UL approval of the device only applies when the UL-approved components are used according
to their "Conditions of Acceptability".
We are not liable for functional limitations caused by using third-party devices or components.
9.1.2
Sending the log files to technical support
Introduction
For diagnostics you can export the SITRANS CC220 log files to a USB stick.
Service and maintenance
9.1 Maintenance and repair work for SITRANS CC220
Smart Condition Monitoring with IIoT Sensors
54
Operating Instructions, 08/2021, A5E50573389-AA