Procedure
1. Start SITRANS SCM IQ in MindSphere.
2. Navigate to the "Device configuration" tab.
3. Click "Connect device" or "Add sensors" on an existing gateway.
4. Select "Connect a new sensor" and choose an existing gateway from the drop-down menu.
5. Click "Next".
6. Enter a name and the MAC address for the sensor. You can find the MAC address on the
SITRANS MS200 nameplate.
7. To map the SITRANS MS200 to an asset in the MindSphere Asset Structure, click on "Browse"
at "Asset and position".
8. Choose an asset and enter additional information on the sensor position.
9. Click "Save".
Result
SITRANS MS200 will now be automatically assigned to the SITRANS CC220 and transfer data to
the chosen Asset of Asset type SITRANS MS200.
7.8
Configuring notifications
Configured users will receive notifications when an anomaly is detected by the application. To
configure the anomaly detection model please refer to Training anomaly detection models
(Page 47).
For more information, watch this video (
https://www.youtube.com/watch?
Commissioning
7.8 Configuring notifications
Smart Condition Monitoring with IIoT Sensors
44
Operating Instructions, 08/2021, A5E50573389-AA