Operating
8
8.1
Training anomaly detection models
Once SITRANS MS200 has collected a sufficient amount of data (typically two weeks), you can
continue with the training of an anomaly detection model. After the trained model is available
you can start the model for continuous anomaly detection.
For more information, watch this video (
https://www.youtube.com/watch?v=i5Khz0MKO68
Required user roles
• Required user roles without MindSphere Subtenants:
– MindSphere user role: TenantAdmin or StandardUser
– SITRANS SCM IQ user role: sitransscmiq:admin
• Required user roles with MindSphere Subtenants:
– MindSphere user role: SubtenantUser
Note: Do not use TenantAdmin when using Subtenants. Subtenant can not see devices
and assets of other subtenants.
– SITRANS SCM IQ user role: sitransscmiq:admin
Procedure
1. Navigate to the "Sensor data modelling" tab.
2. Select an available asset to get further information.
3. To view the sensor data, click "See details".
You can change the visible time range and select one or more variables for a more detailed
view.
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA
47