Siemens SIPROTEC 6MU805, Руководство пользователя, Страница: 145 / 162

Appendix
A.8 Settings
SIPROTEC, 6MU805, Manual
C53000-G1140-C380-5, Release date 06.2018
141
A.8 Settings
Addresses which have an appended "A" can only be changed with DIGSI, under "Display Additional Settings".
The table indicates region-specific default settings. Column C (configuration) indicates the corresponding sec-
ondary nominal current of the current transformer.
Addr. Parameter Function Setting Options Default Setting Comments
0104 OSC. FAULT REC. Device Configuration Disabled
Enabled Disabled Oscillographic Fault Records
0202 Vnom PRIMARY P.System Data 1 0.10 .. 800.00 kV 20.00 kV Rated Primary Voltage
0203 Vnom SECONDARY P.System Data 1 34 .. 400 V 100 V Rated Secondary Voltage (L-L)
0204 CT PRIMARY P.System Data 1 10 .. 50000 A 400 A CT Rated Primary Current
0205 CT SECONDARY P.System Data 1 1A
5A 1A CT Rated Secondary Current
0206A Vph/Vdelta P.System Data 1 1.00 .. 3.00 1.73 Matching ratio Phase-VT To Open-Delta-VT
0214 Rated Frequency P.System Data 1 50 Hz
60 Hz 50 Hz Rated Frequency
0217 Ignd-CT PRIM P.System Data 1 1 .. 50000 A 400 A Ignd-CT rated primary current
0218 Ignd-CT SEC P.System Data 1 1A
5A 1A Ignd-CT rated secondary current
0241 Volt.trans.A:C1 P.System Data 1 1.0 .. 100.0 pF 10.0 pF Voltage transducer A: Capacity C1
0242 Volt.trans.A:C2 P.System Data 1 250 .. 10000 pF 2200 pF Voltage transducer A: Capacity C2
0243 Volt.trans.B:C1 P.System Data 1 1.0 .. 100.0 pF 10.0 pF Voltage transducer B: Capacity C1
0244 Volt.trans.B:C2 P.System Data 1 250 .. 10000 pF 2200 pF Voltage transducer B: Capacity C2
0245 Volt.trans.C:C1 P.System Data 1 1.0 .. 100.0 pF 10.0 pF Voltage transducer C: Capacity C1
0246 Volt.trans.C:C2 P.System Data 1 250 .. 10000 pF 2200 pF Voltage transducer C: Capacity C2
0247 Volt.tran.Vx:C1 P.System Data 1 1.0 .. 100.0 pF 10.0 pF Voltage transducer Vx: Capacity C1
0248 Volt.tran.Vx:C2 P.System Data 1 250 .. 10000 pF 2200 pF Voltage transducer Vx: Capacity C2
0325 Vnom sec Vx P.System Data 1 34 .. 230 V 100 V Rated Secondary Voltage Vx
0333 Vnom prim Vx P.System Data 1 0.10 .. 800.00 kV 20.00 kV Rated Primary Voltage Vx
0352 U4 inverting P.System Data 1 YES
NO NO U4 inverting
0357 SV-Stop Device Configuration YES
NO NO SV-Stop
0369 VT Con Type Device Configuration Conventional
Cap. Volt.Meas. Conventional Voltage Connection type
0459 SysConMUConf Device Configuration Disabled
Enabled Disabled MU Configuration via IEC61850 Configurator
0461 PhaseIndepRatio Device Configuration Disabled
Enabled Disabled Phase Independent Ratio
0403 MAX. LENGTH Osc. Fault Rec. 0.30 .. 6.00 sec 2.00 sec Max. length of a Waveform Capture Record
0404 PRE. TRIG. TIME Osc. Fault Rec. 0.05 .. 0.50 sec 0.25 sec Captured Waveform Prior to Trigger
0405 POST REC. TIME Osc. Fault Rec. 0.05 .. 0.50 sec 0.10 sec Captured Waveform after Event
0406 BinIn CAPT.TIME Osc. Fault Rec. 0.10 .. 5.00 sec;

0.50 sec Capture Time via Binary Input
0407 VLAN ID Merging Unit 0...4095 1 VLAN ID
0408 VLAN Priority Merging Unit 1...7 4 VLAN Priority
0438 PPS Delay Merging Unit 0 μ s, 0.1 μ s...5000.00 μ s 0.0 μ s PPS Delay
0460 PPS Synchro Merging Unit On
OFF ON PPS Synchronization
0440A Overflo Quality Merging Unit False False Quality bit: Overflow
0441A OutRang Quality Merging Unit Set By MU
True
False Set By MU Quality bit: OutofRange
(Options True and False for test purpose)
0442A BadRef Quality Merging Unit False False Quality bit: BadReference
0443A Oscill Quality Merging Unit False False Quality bit: Oscillatory
0444A Failure Quality Merging Unit Set By MU
True
False Set By MU Quality bit: Failure
(Options True and False for test purpose)
0445A OldData Quality Merging Unit False False Quality bit: OldData