Siemens SIPLUS HCS3200, Руководство по эксплуатации

Страница: 46 / 74

Communication
9.3 Cyclic output data
SIPLUS HCS3200
46
Operating Instructions, 07/2014, A5E31278506C/002
9.3 Cyclic output data
The cyclic output data can be addressed in the S7 through the process image or I/O
commands.
Process image output (PIQ)
The process image for the outputs PIQ contains the control data for the individual modules.
All addresses are specified as an offset relative to the base address 0.0. The actual
addresses are obtained from the configuration of the overall system.
Table 9- 2 Addressing of outputs
Byte Bit Meaning Description
0
0 = 0: Heating Off
= 1: Heating On
Refer to section Power output control
(Page 39)
1 = 0: Line voltage compensation Off
= 1: Line voltage compensation On
Refer to section Line voltage compen-
sation (Page 42)
2 ... 7 0 (reserved)
1 Power output 1 setpoint Refer to section Power output control
(Page 39)
2 Power output 2 setpoint
3 Power output 3 setpoint
4 Power output 4 setpoint
5 Power output 5 setpoint
6 Power output 6 setpoint
7 Power output 7 setpoint
8 Power output 8 setpoint
9 Power output 9 setpoint