Siemens SIPART PS100, Краткое руководство по эксплуатации

Страница: 41 / 54

WARNING
Improper connection after maintenance
Risk of explosion in areas subject to explosion hazard.
• Connect the device correctly after maintenance.
• Close the device after maintenance work.
Refer to Electrical connection (Page 29).
8.4 Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging. Any devices/replacement parts which
are returned without a decontamination declaration will be cleaned at your expense before
further processing. For further details, refer to the operating instructions.
See also
Return document ( http://www.siemens.com/processinstrumentation/returngoodsnote )
Decontamination declaration ( http://www.siemens.com/sc/declarationofdecontamination )
8.5 Disposal
Devices described in this manual should be recycled. They may not be dis‐
posed of in the municipal waste disposal services according to the Directive
2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap‐
proved disposal service for eco-friendly recycling. Observe the specific reg‐
ulations valid in your country.
Further information about devices containing batteries can be found at:
Information on battery/product return (WEEE) (
https://
support.industry.siemens.com/cs/document/109479891/ )
Service and maintenance
8.5 Disposal
SIPART PS100
Compact Operating Instructions, 05/2021, A5E50188940-AA
41