Siemens SIPART PS100, Краткое руководство по эксплуатации

Страница: 12 / 54

3.1.3 Conformity with European directives
The CE marking on the device shows conformity with the regulations of the following European
guidelines:
Electromagnetic com‐
patibility EMC
2014/30/EU Directive of the European Parliament and of the Council on the har‐
monization of the laws of the Member States relating to electromag‐
netic compatibility.
Atmosphère explosi‐
ble
ATEX
2014/34/EU Directive of the European Parliament and of the Council on the har‐
monization of the laws of the Member States relating to equipment
and protective systems intended for use in potentially explosive at‐
mospheres.
2011/65/EU RoHS Directive of the European Parliament and of the Council on the restric‐
tion of the use of certain hazardous substances in electrical and elec‐
tronic equipment
The directives applied can be found in the EU declaration of conformity for the associated device.
3.1.4 Product approval and UL compliance
Classification according to
pressure equipment direc‐
tive (PED 2014/68/EU) For fluid group 1 gases; fulfills requirements according to article 4, paragraph 3 (good
engineering practice SEP)
CE conformity The applicable directives and applied standards with their revision levels can be found
in the EU declaration of conformity on the Internet.
UL conformity You can find the appropriate "Standard(s) for Safety", including the relevant versions,
in the UL-CERTIFICATE OF COMPLIANCE on the Internet under Certificate (
http://
www.siemens.com/processinstrumentation/certificates ).
WARNING
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure to
observe this requirement cancels the manufacturer's warranty and the product approvals.
Safety notes
3.1 Prerequisites for safe use
SIPART PS100
12
Compact Operating Instructions, 05/2021, A5E50188940-AA