manualshive.com logo in svg

Siemens SINUMERIK 840C, Руководство оператора

Поделиться
Скачать
Siemens SINUMERIK 840C Скачать руководство пользователя страница 60

01.99

3 MMC Applications

 © Siemens AG 1999 All Rights Reserved

6FC5198-6AA60-0BP1

SINUMERIK 840C, OEM Version for Windows (BA)

3-7

You can select individual applications as follows using the operator panel
keyboard:

•

Press the DATA AREA key to select Area Switchover.

•

Press the PAGE UP or PAGE DOWN key to activate the Task Manager.

•

Select the desired application with PAGE UP or PAGE DOWN.

•

Press any other key to deselect Area Switchover and activate the desired
application.

Where MS-Windows applications are provided with a control menu box, the
commands listed in this box can be used to move the application window to
another area of the NC screen.

•

Activate the application program window that you want to move.

•

Open the control menu box by pressing ALT and SPACE or ALT and (-).

•

Select the command Move in the control menu. The pointer changes to a
four-headed arrow.

•

Now move the window using the ARROW keys. An outline of the window
moves when you press the ARROW keys.

•

Press the INPUT key when the window is in the desired position.

You can change the size of application windows which have a control menu
box.

•

Activate the window you want to resize.

•

Open the control menu box by pressing the key combination ALT and
SPACE or (-).

•

Choose the Size command from the control menu. The pointer changes to a
four-headed arrow.

•

Press one of the ARROW keys to move the pointer to the window border
you want to move.

•

Now press one of the ARROW keys to move the selected border in the
desired direction.

•

Press the INPUT key when the window is the desired size.

Operator panel
keyboard

Moving a window

Changing the size
of a window

Содержание SINUMERIK 840C














































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды