manualshive.com logo in svg

Siemens SINUMERIK 840C, Руководство оператора

Поделиться
Скачать
Siemens SINUMERIK 840C Скачать руководство пользователя страница 184

01.99

5 Parameters

© Siemens AG 1999 All Rights Reserved

6FC5198-6AA60-0BP1

SINUMERIK 840C, OEM Version for Windows (BA)

5-31

5.3.6.12

Travel to fixed stop

Press the ETC key to extend the SETTING DATA softkey bar.

Press the softkey and the input screen is displayed with the configured axes.
You can use the function "Travel to fixed stop" to set-up defined forces for
clamping workpieces, e.g. tailstocks, sleeves, grippers, etc.
The clamping force for this function is entered in the input fields assigned to
the axes.

Input range: 0 to 999999
Tolerance: 0.1% of max. power setpoint (motor torque)

•

The function "Travel to fixed stop" is an option.

•

The function can be used for all axes.

•

Spindles that are to travel to the fixed stop must first be switched to C axis
mode.

Machine manufacturer

The function "Travel to fixed stop" must be configured in the PLC user
program. Please refer to the documentation for the machine concerned.

■

T ra ve l  to
fixed sto p

Note

Содержание SINUMERIK 840C














































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды