manualshive.com logo in svg

Siemens SINUMERIK 840C, Руководство оператора

Поделиться
Скачать
Siemens SINUMERIK 840C Скачать руководство пользователя страница 176

01.99

5 Parameters

© Siemens AG 1999 All Rights Reserved

6FC5198-6AA60-0BP1

SINUMERIK 840C, OEM Version for Windows (BA)

5-23

5.3.6.8

Position measuring signals

You select the softkey and the following display appears:

Fig. 5-11 Position measuring signals

You can enter the values for 4 software cam pairs in the input fields. The
SOFTWARE CAMS function allows you to generate position measuring
signals in addition to the existing hardware cams.
Input range: 

±

 99999999

Machine manufacturer

The software cams function must be configured in the PLC user program by
the machine manufacturer. Please refer to the documentation for the machine
concerned.

•

The software cam function is an option.

•

This function can only be used for linear axes.

•

The software cam signals can only be activated after referencing the NC
axes.

•

The cam positions refer to the machine zero offset and are used in the
active machine measurement system. The cam positions are not verified in
the input display with regard to the maximum traversing ranges.

P osition
m e as. signa ls

Notes

Содержание SINUMERIK 840C














































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды