Siemens SIMOTICS S-1FG1 Скачать руководство пользователя

Страница: 43 / 170

SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA

Preparing for use

3.1

Shipping and packaging

Packaging
The 1FG1 servo geared motors are delivered already assembled. Additional items are

shipped in separate packaging if applicable.

●

Please pay attention to the handling notes on the packaging when the servo geared

motor is delivered

Table 3- 1

Handling notes and their meaning

Symbol

Meaning

Symbol

Meaning

Fragile

(ISO 7000, No. 0621)

Keep dry

(ISO 7000, No. 0626)

Top

(ISO 7000, No. 0623)

Do not stack

(ISO 7000, No. 2403)

Scope of delivery of a servo geared motor

●

Upon receipt of the delivery, check immediately whether the items delivered are in

accordance with the accompanying documents.

Note
Siemens will not accept any claims relating to items missing from the delivery and which

are submitted at a later date.

●

any apparent transport damage with the transport company immediately

–

any apparent defects or missing components with the appropriate SIEMENS office

immediately.

The safety instructions are included in the scope of delivery.
The delivery includes a second rating plate. The second rating plate can be used to post the

motor data additionally in the vicinity of the servo geared motor.

Содержание SIMOTICS S-1FG1











































































































































































Результаты поиска

Содержание SIMOTICS S-1FG1

Отзывы:

Похожие инструкции для SIMOTICS S-1FG1

Бренды по названию

Популярные бренды

Siemens SIMOTICS S-1FG1, Руководство по эксплуатации

Результаты поиска

Содержание SIMOTICS S-1FG1

Отзывы:

Похожие инструкции для SIMOTICS S-1FG1

Бренды по названию

Популярные бренды