Siemens Simotics M-1FE1 Series, Руководство по настройке

Страница: 98 / 150

Mounting
7.1 Mechanical mounting
SIMOTICS M-1FE1 synchronous built-in motors
96
Configuration Manual, 09/2019, A5E47872980B AA
Motor type A in mm
1)
B in mm D in mm
1FE109 ☐ -4 ☐☐☐
rotor d
i
= 72 mm
rotor d
i
= 80 mm
5 3)
4
12
12
108
108
1FE110 ☐ -4 ☐☐☐ 4 3) 12 120
1FE112 ☐ -4 ☐☐☐ 4 3) 12 145
1) Minimum clearance A between the rotor and external balancing disk for magnetic materials.
Clearance A is eliminated for non-magnetic materials (refer to the recommendations, dimen-
sion drawings).
2) Version only with rotor sleeve, not prebalanced
3) Clearance is provided as a result of the rotor end plates (= aluminum or non-magnetic steel).
The balancing disk can be in contact with the rotor end plate.
Mounting dimensions
The mounting dimensions can be taken from the dimension drawings, see Chapter
Dimension drawings (Page 133).
A minimum shaft wall thickness is specified in the area of the interference fit. These can
be taken from the dimension drawings.