Siemens Simotics M-1FE1 Series, Руководство по настройке

Страница: 97 / 150

Mounting
7.1 Mechanical mounting
SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA
95
Motor type a in mm t1 in mm b in mm t2 in mm
1FE105 ☐ -6
4 5 6
3
1FE106 ☐ -6 4
1FE108 ☐ -6 5
1FE109 ☐ -6
1FE111 ☐ -6 5
Rotor core without sleeve
● The rotor core is not prebalanced.
● The "spindle shaft - rotor core without sleeve" system must be balanced, e.g. with
balancing disk.
Use the balancing planes, which must be appropriately provided on the spindle axis.
①
Balancing disk (not included in scope of delivery)
②
Rotor core
③
Spindle shaft
Figure 7-7 Recommended balancing disks for rotors without sleeve; dimensions A, B and D,
refer to the following table
Table 7- 1 Dimensions A, B and D for the recommended balancing disks
Motor type A in mm 1) B in mm D in mm
1FE104 ☐ -6 ☐☐☐ The rotor is the end stop for the
balancing disk
10 52
1FE105 ☐ -6 ☐☐☐ 5
3)
10 70
1FE106 ☐ -6 ☐☐☐ 4 10 80
1FE108 ☐ -6 ☐☐☐ 4 12 117
1FE109 ☐ -6 ☐☐☐ 5 3) 12 125
1FE111 ☐ -6 ☐☐☐ 5 3) 12 155
1FE114 ☐ -8 ☐☐☐ 2) The rotor is the end stop for the
balancing disk
12 190
1FE1144 ☐ -8 ☐☐☐ 2) 22 15 186
1FE105 ☐ -4 ☐☐☐ 4 10 63
1FE105 ☐ -4H ☐☐ 7.5 10 63
1FE107 ☐ -4 ☐☐☐ 4 10 80
1FE108 ☐ -4 ☐☐☐ 4 10 95