Siemens SIMOCODE pro C, Системное руководство

Страница: 278 / 408

Commissioning, service, troubleshooting
13.3 Service
SIMOCODE pro
278
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Saving parameters from the basic unit to a SIMOCODE ES file
Proceed as follows:
Table 13- 17 Saving parameters to a SIMOCODE ES file
Step Description
1. Plug the PC cable into the system interface.
2. Start SIMOCODE ES.
3. Create a new project via "Create new project".
4. Switch to the project view.
5. Go online, e.g. via "Online & Diagnostics" in the project navigator
6. Open the "Online access" menu in the project navigator and select the suitable interface by
double-clicking it.
7. Double-click on "Update accessible devices".
8. Select "Online → Upload device as new station (hardware and software) ...".
9. Save the project.
Note
This function will not be available if the TEST / RESET button has been disabled.
Saving parameters from a SIMOCODE ES file into the basic unit
Proceed as follows:
Table 13- 18 Saving parameters from a SIMOCODE ES file into the basic unit
Step Description
1. Plug the PC cable into the system interface.
2. Start SIMOCODE ES.
3. Open a project.
4. Select Online → Extended online connection.
5. Select the type of the PG/PC interface (SIRIUS PtP or PN/IE).
6. Select the PG/PC interface.
7. Click the "Start search" button. A search is made for compatible stations.
8. Select a station.
9. Load the parameters to the device via "Online → Load to device".