Siemens Simatic series Скачать руководство пользователя страница 137

Страница: 137 / 194

Device maintenance and repair

7.5 Installing the software

SIMATIC IPC547G
Operating Instructions, 04/2020, A5E49948632-AA

137

Windows 7 and Windows Server 2008 R2:
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Region and Language"

Select the "Keyboards and Languages" tab.

Click the "Install/uninstall languages" button and make the required changes.

Windows 10, Windows Server 2012 R2, Windows Server 2016 and Windows Server 2019:
1.

Right-click the start menu in the task bar and select "Command Prompt (Admin)".

Enter the following command in the command line:

Dism /online /Add-Package /PackagePath:#Path to the language pack#

For "

#Path to language pack#

", enter the path to the language pack you want to install.

Example:

Dism /online /Add-Package /PackagePath:E:\Languagepacks\ja-jp\lp.cab

7.5.7

Restoring the delivery state

You can restore the original software using the Restore DVD. The DVD contains the

necessary images and tools for transferring the software to the hard disk drive or SSD of

your device.
The following options are available for restoring the delivery state:

●

Restore the entire hard disk/SSD with drive C: and D:

●

Restore drive C:
This means data stored on drive D: is retained.

Back-up authorization or license key

●

Check whether you can back-up your authorization or license key from the drive and

perform this procedure if possible.

●

If backup is not possible, please contact Customer Support. There you can obtain

information necessary for corresponding software authorization.

NOTICE
Risk of data loss
If "Restore system partition only" is set all data on drive C: (system partition) will be

deleted. All data, user settings and all authorizations or license keys on drive C: are lost!

All data on drive C: will be completely deleted, reformatted and overwritten with the

original factory software.
ALL data, user settings as well as all authorizations or License Keys on the entire drive

are lost when you select the "Restore entire hard disk" option.

Содержание Simatic series



































































































































































































Результаты поиска

Содержание Simatic series

Отзывы:

Бренды по названию

Популярные бренды

Siemens Simatic series, Руководство по эксплуатации

Результаты поиска

Содержание Simatic series

Отзывы:

Бренды по названию

Популярные бренды