Siemens Simatic series Скачать руководство пользователя страница 136

Страница: 136 / 194

Device maintenance and repair

7.5 Installing the software

SIMATIC IPC547G

136

Operating Instructions, 04/2020, A5E49948632-AA

Changing the settings for language, region and formats of a registered user account

Windows 7 and Windows Server 2008 R2:
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Region and Language"

You can make the desired changes in the "Formats", "Location" " and "Keyboards and

Languages" tabs.

Windows 10, Windows Server 2012 R2, Windows Server 2016 and Windows Server 2019:
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Region"

You can make the desired changes in the "Formats", and "Location" tabs.

Changing the settings for language, region and formats of the system account and the standard user

account

You can change the settings for language, region and formats of the system account (for

example, the language in the user login dialog) and the settings of the standard user account

(standard setting for new users). The settings of the registered user are copied to the system

account and the standard user account for this purpose.

Windows 7 and Windows Server 2008 R2:
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Region and Language"

You can make the required changes in the "Administrative" tab. You copy the settings by

clicking the respective button.

Windows 10, Windows Server 2012 R2, Windows Server 2016 and Windows Server 2019:
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Region"

You can make the required changes in the "Administrative" tab. You copy the settings by

clicking the respective button.

Installing language package

The available language packages are described in the product description in section

"Features (Page 12)". Some language packages are available on the Recovery DVD in the

"Languagepacks" folder.

Содержание Simatic series



































































































































































































Результаты поиска

Содержание Simatic series

Отзывы:

Бренды по названию

Популярные бренды

Siemens Simatic series, Руководство по эксплуатации

Результаты поиска

Содержание Simatic series

Отзывы:

Бренды по названию

Популярные бренды