Siemens SIMATIC PG 760 PII, Руководство пользователя

Страница: 71 / 120

5-17
PG 760 PII Programming Device
C79000-G7076-C766-01
The following submenu appears when you select the option “PCI Devices” in
the advanced menu:
PhoenixBIOS Setup Utility.
Item Specific Help
F1
ESC
Help
Exit
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit Sub-Menu
Main Security Power Exit Advanced
Option Rom Scan [Enabled]
Enable Master: [Enabled]
PCI Devices, Slot #1
Latency Timer: [0040h]
Initialize device
expansion rom
Figure 5-13 “PCI Devices, Slot #1” Submenu
Option ROM
Scan: [Enabled] The ROM option of the PCI module (if
present) is enabled
[Disabled] The ROM option of a PCI module is disabled.
Enable Master: [Enabled] This slot can assume the PCI master function
[Disabled] This slot can only work as a PCI slave.
Latency Timer [Default] The number of active PCI clock cycles of the
master modules are determined by the module.
[0020H You can use these settings to set the maximum
to number of active PCI clock cycles to the
00E0H] chosen value.
Option “ PCI
Devices”
Configuring the PG 760 PII