manualshive.com logo in svg

Siemens SIMATIC NET CP 142-2, Руководство пользователя, Страница: 81 / 84

Поделиться
Скачать
Siemens SIMATIC NET CP 142-2 Скачать руководство пользователя страница 81

B8976111/02

AS-i Master Module CP 142-2

D-1

D 

Notes on the CE Label

Product Name:

 CP 142-2

6GK7142-2AH00-0XA0

EU Directive EMC
89/336/EEC

The product listed above meets the requirements of the EU directive
89/336/EEC “Electromagnetic Compatibility”.

The EU conformity certificates are available for the relevant authorities
according to the EU directive and are kept at the following address:

Siemens Aktiengesellschaft
Automation and Drives
Industrielle Kommunikation (A&D PT2)
Postfach 4848
D-90327 Nuremberg

Area of Application

The product meets the following requirements:

Area of application

Requirements

Noise emission

Noise immunity

Industrial

EN 50081-2 : 1993

EN 50082-2 : 1995

Installation
Instructions

The product meets the requirements providing you adhere to the instructions
for installation and operation as described in the following documentation:

Description of the AS-Interface Master Module CP 142-2
Manual SIMATIC ET 200X Distributed I/O System.

Information for
Manufacturers of
Machines

The product is not a machine in the sense of the EU directive on machines.
There is therefore no conformity certificate for this product complying with the
EU directive for machines 89/392/EEC.
If the product is integrated as part of the electrical equipment of a machine, it
must be included in the conformity application of the manufacturer.

‰

Содержание SIMATIC NET CP 142-2





















































































Отзывы:

Нет отзывов