manualshive.com logo in svg

Siemens SIMATIC NET CP 142-2, Руководство пользователя, Страница: 11 / 84

Поделиться
Скачать
Siemens SIMATIC NET CP 142-2 Скачать руководство пользователя страница 11

B8976111/02

AS-i Master Module CP 142-2

1-5

1.1.4 Sample Programs

The diskette shipped with this manual contains sample programs which will help you to program the
CP 142-2 when this is installed in a distributed ET 200X I/O system with preprocessing (for example
BM147).

1.1.5  Further Support and Hotline

Who to Contact

If you have technical questions about using the product described
here, please contact your local Siemens representative.

The addresses are listed:

➢ 

in our catalog IK 10

➢ 

on the Internet (http://www.ad.siemens.de)

Frequently Asked
Questions

Our customer support on the Internet provides useful information and
answers to frequently asked questions (FAQ). Under FAQ, you will find
information about our entire range of products.

The address of the A&D home page in the World Wide Web of the
Internet is as follows:

http://www.ad.siemens.de/net

Hotline

Our hotline is also available to deal with problems:

➢ 

Telephone:0911 - 895 - 7000

(outside G49 - 911 - 895 - 7000)

➢ 

Telefax: 0911 - 895 - 7001

(outside G49 - 911 - 895 - 7001)

➢ 

E-Mail:

[email protected]

➢ 

Mailbox (BBS, analog/ISDN, 8N1):

0911 - 895 - 7100
(outside G49 - 911 - 895 - 7100)

Содержание SIMATIC NET CP 142-2





















































































Отзывы:

Нет отзывов