Configuring the operating system
6.3 Setting the display brightness
MP 377 15" Touch daylight readable (WinCC flexible)
42
Operating Instructions (Compact), 04/2009, A5E02532357-01
6.3
Setting the display brightness
Introduction
The brightness of the display can be set in 256 levels. Dimming takes place based on a
gradual curve and is perceived by the eye as linear.
You change the brightness as follows:
●
Single-stage by using a button.
●
Multi-stage by using the slider control.
You can limit the number of brightness settings. You can also enter a value for the
brightness with which the HMI device is to start.
You can change the brightness of the display during the startup phase or while in runtime.
Pay particular attention to the section "Configure "SetBrightness" function (Page 61)".
Requirement
These are the requirements:
You have opened the OP Properties dialog, "Display" tab with the OP icon.
