Siemens SIMATIC Mobile Client900WXN, Руководство по эксплуатации

Страница: 36 / 94

Installing and connecting the device
3.2 Connection box and wall bracket
Mobile Client900WXN
36
Operating Instructions, 04/2015, A5E35883103-AB
3.2.3.2 Using the magnetic wall bracket
Procedure
Inserting a device in the magnetic wall bracket
1.
Insert the top edge of the device handle into the top of the magnetic wall bracket.
2. Move the lock hook as shown and hook the device into the magnetic wall bracket.
The device will slide into the lock position.
3. Release the lock hook.
4. Check to make sure that the device is completely engaged in the magnetic wall bracket.
NOTICE
Device can drop
In the case of improper locking, the device could fall out of the wall bracket and get
damaged.
Make sure that the lock hook is latched on the device.
Taking the device out of the magnetic wall bracket
1.
Pull the lock hook toward the device and lift the device slightly at the bottom.
The device is unlocked.
2. Release the lock hook.
3. Remove the device from the magnetic wall bracket.