Siemens SIMATIC Mobile Client900WXN Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 94

background image

Mobile Client900WXN
Operating Instructions, 04/2015, A5E35883103-AB

23

Safety guidelines

2

2.1

Safety Instructions

Safety regulations

WARNING

Instructions in the operating instructions
Strictly observe all instructions in these operating instructions at all times. Otherwise,

hazardous situations can arise or the safety mechanisms in the HMI device can be

rendered ineffective.

Observe the safety and accident prevention instructions applicable to your application in

addition to the safety information given in this manual.

WARNING

Hazardous operating states and faults in the system
The configuration engineer for a machine or system PLC must take precautions so that an

interrupted program can be restarted normally after voltage dips or power failures.

Dangerous operating conditions must not occur, even temporarily.
If faults in the system can cause bodily injury or significant property damage, additional

measures must be taken outside of the system. These measures must also ensure safe

operating conditions in the system in the event of a fault.
The system's configuration engineer must take precautions to ensure that memory changes

that could lead to a dangerous situation can only be undertaken by authorized persons.

WARNING

Risk of shock
After a hard impact, check the HMI device to ensure it is fully functional, for example, in the

event that the HMI device is dropped.
Exclusive operation
If the system is operated with the HMI device:
Ensure that current operation is only possible by means of the HMI device and not from any

other point on the system.

«
...
21
22
23
24
25
...
»

Содержание SIMATIC Mobile Client900WXN































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC Mobile Client900WXN

Бренд: Valve Concepts Страницы: 16

Бренд: Wasp Страницы: 16

Бренд: Eaton Страницы: 166

Бренд: NEC Страницы: 146

Бренд: H3C Страницы: 5

Бренд: H3C Страницы: 27

Бренд: H3C Страницы: 4

Бренд: H3C Страницы: 54

Бренд: H3C Страницы: 10

Бренд: H3C Страницы: 10

Бренд: Universal Remote Страницы: 20

Бренд: Lab.gruppen Страницы: 2

Бренд: Greenheck Страницы: 4

Бренд: Vector Страницы: 8

Бренд: ISVT Страницы: 78

Бренд: Linear Technology Страницы: 8

Бренд: Precision Страницы: 8

TRAP-SHUFFLE Game Simulator

Бренд: RF SOLUTIONS Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды