Siemens SIMATIC IPC347E Скачать руководство пользователя

Страница: 98 / 148

Appendix Motherboard

A.4 Installing drivers

SIMATIC IPC347E

Operating Instructions, 09/2018, A5E41134132-AE

Step 2: install the Intel Graphics driver

Click Display onboard: Intel HD Onboard Graphics.

Click to install the chipset driver.

Click Run to allow the computer to start the installation.

The system starts to extract file from driver package.

Select the check box and click Next to start the setup.

Click Yes to accept License Agreement.

Click Next to confirm the

Readme File Information and move on.

Click Next to continue setup.

Check the radio button next to “Yes, I want to restart this computer now.” and click Finish

to reboot the computer.

Step 3: install the Realtek LAN driver

Click Ethernet onboard: Realtek Onboard Network Adaptor.

Click to install the chipset driver.

Click Run to start the installation.

Click Next to continue the installation.

Click Install to start the driver installation.

Click Finish to confirm the Realtek LAN driver is installed.

Step 4: install the Realtek AUDIO driver

Click Audio: Realtek ALC High Definition Audio.

Click to install the Audio driver.

Click Run to allow the system to start the installation.

Click Yes to continue the installation.

Check the radio button next to “Yes, I want to restart my computer now.” and click OK

to finish setup.

Содержание SIMATIC IPC347E





















































































































































Результаты поиска

Содержание SIMATIC IPC347E

Отзывы:

Похожие инструкции для SIMATIC IPC347E

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC347E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC347E

Отзывы:

Похожие инструкции для SIMATIC IPC347E

Бренды по названию

Популярные бренды