Siemens SIMATIC IPC347E, Руководство по эксплуатации

Страница: 35 / 148

Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
35
Connecting the power supply
1. Make sure that the on/off switch
②
is in the
'0' (off) position.
Put the switch
②
in the '0' position prevents
unintentional startup of the device when you
plug in the power cable.
2. Connect the power cable to socket
①
.
3. Insert the power cable in the electrical
socket.
4. Switch on the on/off switch
②
.
3.3.4 Connecting the device to networks
The following options are available for integrating the device to the existing or planned
system environments and networks.
Ethernet
Wake on LAN and Remote Boot are supported.
You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and
data exchange with automation devices, such as SIMATIC S7.
You need the "SOFTNET S7" software package for using the SIMATIC S7 to communicate.
PROFINET
PROFINET can be operated via:
● Standard Ethernet interfaces (RT)
SIMATIC NET
Use this software package to create, operate and configure an innovative network for Field &
Control level. Information on SIMATIC NET can be found on the SIMATIC NET Manual
Collection CD. The software package and the documentation are not included in scope of
the delivery.
Additional information
You can find additional information at the following link:
Siemens central support (
https://support.industry.siemens.com )