Siemens SIMATIC IPC347E Скачать руководство пользователя

Страница: 25 / 148

SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE

Installing and connecting the device

3.1

Preparing for installation

3.1.1

Checking the delivery package

Procedure

When you receive a delivery, inspect the packaging for visible transport damage.

In case of any transport damage, turn to the shipping company in charge. Have the

forwarder confirm the transport damage immediately.

Unpack the device at its installation location.

Keep the original packaging in case you have to transport the unit again.

NOTICE
Damage to the device during transport and storage
If a device is transported or stored without packaging, shocks, vibrations, pressure and

moisture might impact the unprotected device. A damaged packaging indicates that

ambient conditions have already had an impact the device.
The device might be damaged.
Do not dispose of the original packaging. Pack the device when it needs to be

transported or stored.

Inspect the contents of the packaging and all the accessories you ordered. Make sure

that they are complete and not damaged.

Содержание SIMATIC IPC347E





















































































































































Результаты поиска

Содержание SIMATIC IPC347E

Отзывы:

Похожие инструкции для SIMATIC IPC347E

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC347E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC347E

Отзывы:

Похожие инструкции для SIMATIC IPC347E

Бренды по названию

Популярные бренды