Siemens SIMATIC IPC347E, Руководство по эксплуатации

Страница: 28 / 148

Installing and connecting the device
3.2 Installing the device
SIMATIC IPC347E
28
Operating Instructions, 09/2018, A5E41134132-AE
Procedure
Identification date Source Value
Order number Rating plate 6AG4012-1 ...
Serial number Rating plate s XXX 1234...
Manufacturing version Rating plate FS
Microsoft Windows Product Key COA label
Ethernet address 1, MAC address BIOS setup > "Main" menu
or:
Component label
⑤
Ethernet address 2, MAC address
⑥
1. Copy the order number, serial number and manufacturing version in the table listed
above.
2. Copy the Windows "Product Key" to the table.
3. Copy the Ethernet addresses from the component label to the table.
The Ethernet addresses can also be found in the BIOS setup (F2 key) under "Main >
System Information", entries "LAN 1 MAC" and "LAN 2 MAC".
3.2 Installing the device
3.2.1 Installation information
NOTICE
Risk of fire
If you install the device in an unapproved mounting position or if you do not observe the
ambient conditions, the device can overheat. Conformity with the low voltage directive
becomes void.
Device overheating can cause a fire. Proper functioning of the device is no longer
guaranteed.
Before you install the device, note the following general installation information.
Note
If the equipment is used in a manner not specified by the manufacture, the protection
provided by the equipment might be impaired.