manualshive.com logo in svg

Siemens SIMATIC HMI OP37/Pro, Руководство по эксплуатации оборудования, Страница: 2 / 74

Поделиться
Скачать
Siemens SIMATIC HMI OP37/Pro Скачать руководство пользователя страница 2

ii

This manual contains notices which you should observe to ensure your own personal safety,
as well as to protect the product and connected equipment. These notices are highlighted in
the manual by a warning triangle and are marked as follows according to the level of danger:

!

Warning

indicates that death, severe personal injury or substantial property damage can result if
proper precautions are not taken.

!

Caution

indicates that minor personal injury or property damage can result if proper precautions are
not taken.

Note

draws your attention to particularly important information on the product, handling the
product, or to a particular part of the documentation.

Equipment may be commissioned and operated only by qualified personnel. Qualified per-
sonnel within the meaning of the safety notices in this manual are persons who are authorized
to commission, ground and identify equipment, systems and circuits in accordance with
safety engineering standards.

Note the following:

!

Warning

The equipment may be used only for the applications stipulated in the catalog and in the
technical description and only in conjunction with other equipment and components recom-
mended or approved by Siemens.

Startup must not take place until it is established that the machine, which is to accommodate
this component, is in conformity with the guideline 89/392/EEC.

Faultless and safe operation of the product presupposes proper transportation, proper stor-
age, erection and installation as well as careful operation and maintenance.

SIMATIC

is a registered trademark of Siemens AG.

Some of the other designations used in these documents are also registered trademarks; the
owner’s rights may be violated if they are used by third parties for their own purposes.

Editor and Publisher: A&D PT1

We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be pre-
cluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary cor-
rections included in subsequent editions. Suggestions for improve-
ment are welcomed.

Disclaimer of Liability

Copyright 

 Siemens AG 1996 All rights reserved

The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design, are
reserved.

Siemens AG
Bereich Automatisierungstechnik
Geschäftsgebiet Industrie-Automatisierung
Postfach 4848, D-90327 Nürnberg

 Siemens AG 1998

Technical data subject to change.

Siemens Aktiengesellschaft

Order-No.  6AV6591-1DA01-0AB0

Safety Guidelines

Qualified Personnel

Correct Usage

Trademarks

Impressum

Содержание SIMATIC HMI OP37/Pro











































































Отзывы:

Нет отзывов